2013 Subaru BRZ 2.0L + NOS Controller

$799.00

New 2013 Subaru BRZ With Unichip Progressive NOS controller (Includes 2 Solid State NOS Drivers)


Adds up to 48hp & 47ft-lb (With Nitrous 35 shot)
Adds up to 75hp & 73ft-lb (With Nitrous 50 shot)

Please UPDATE your vehicle mods below


Out of stock

Product Description

Unichip map download tip

Help Tip! There are lots of options which might not make sense at first but if you know what you need it will all come together. To add Nitrous to your Subaru BRZ you will need the following main components:

  • BRZ Plug and Play kit (Includes Unichip and Harness – pre-programmed) (Included in this kit)
  • Progressive Unichip NOS Controller (Includes 2 Solid State NOS Drivers – pre-programmed) (Included in this kit)
  • NOS Fogger System (Single Nozzle Wet Kit) (Includes Solenoids and 10 lbs bottle and accessories) (Optional – See “Nitrous Options” above)

We are pleased to announce our Unichip Nitrous controller! This Single Wet Fogger System is the perfect upgrade for any Subaru BRZ. The main focus on this kit is in the order of safety, cost and ease of installation for ultimate fun. 

Main Features:

  • Save 35 shot (upgradable to 50 shot)
  • Works with any NOS Nitrous kit 
  • Adds up to 48hp &47ft-lb (With Nitrous 35 shot) and 75hp & 73ft-lb (With Nitrous 35 shot)
  • And up 13hp & 12ft-lb (without nitrous) over & above what you gain from aftermarket parts and also optimizes settings to take full advantage of all bolt-on accessories.
  • Progressive Nitrous Control (more details here… coming soon)
  • Auto Timing Retard (No Other System can do this)
  • Drive by wire throttle monitor and NOS correction
  • Auto Starting RPM (as low as 2000 rpm)
  • Auto Shut off RPM (a must to assure that you don’t spray any nitrous in the rev limiter area)
  • Pre Programmed with multiple map options
  • Custom Tune-able (need Unichip Tuning Software)
  • Easily plugs into the stock engine sensors in minutes , no programming necessary . Our Plug ‘n Play harnesses comprise only the finest components, including OEM connectors, gold-plated terminals & highest spec SAE wiring.
  • Realizes the full potential of Aftermarket add-on’s like Cold-Air-Intakes & exhaust systems, as each kit comes pre-mapped for the exact set-up of each car or truck.
  • No end-user tuning necessary , just plug the kit into the car & you’re ready to go.
  • Easily upgradable for future add-on’s.
  • Each kit comes with two maps : a low octane performance map & a high octane performance map, switchable from within the vehicle. (5-maps with Flux2).
  • Fully tune-able by a Unichip Custom Tuner for customized add-on’s . This basically means that the Engine Management System in your ride is now as tuner friendly as the most advanced Standalone systems in the world , with full control over timing & fueling, without sacrificing any of the factory features. This feature is unmatched by any reflash-tuning or other similar product.
  • Plug ‘n Play harnesses are fully Flux capable – purchase Flux when you purchase the Plug ‘n Play kit or upgrade later – Flux simply plugs into the Unichip Plug ‘n Play harness.
  • Plug ‘n Play kits are removed from the vehicle in minutes , returning the vehicle to stock tuning , without leaving a footprint of ever having been modified (a feature which reflash-tuning cannot match).
  • Bang for the buck, no other product can match this kit!
  • Each kit comes with all components necessary for a complete and simple installation. A great addition to your nitrous kit for the budget minded Subaru owner.

http://unichipwholesale.com/wp-content/uni-dyno/2.5-Liter-Camry-Unichip-Dynosheet.pdf

http://unichipwholesale.com/wp-content/uni-instructions/2.5-Liter-Camry-Instructions-2.pdf

The following components are included in this kit:

  • Q version Unichip (pre programmed)
  • STS (straight to sensor) Plug and Play harness
  • Progressive Nitrous Controller with 2 solenoid drivers

Optional – See options above

  • Single Fogger 35/50 SHOT kit with 10lb bottle – Optional
  • Flux2 – Optional
  • Unichip Q+ – Optional

Additional Information

Weight 5.00 lbs
Dimensions 17 × 11 × 4 in
UD_Pulley
Year Model

, ,

Make

Model

Engine

Intake

, , , , , , , , , , , , , , , , , , ,

Exhaust

, , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Header

, , , , , , , , , , , , , , , , , , , , , , , , , ,

[template id=5041 expires=7200]